Johnson BACnet Configuration

Preparation Process

To prepare for your CopperTree service and ensure a quick and easy installation please complete and return the Onboarding Packet provided by your CopperTree account representative.

Device Requirements

• 10000 points per CopperTree device, ~800 controllers
• Send CopperTree the BAS Subnet and IP of the NAE, NCE, or SNET device.
• Send CopperTree the port number (for both BAS and network), if not default (47808)
• If the BAS is not on the outbound internet, the device will need a connection to the internet via a USB-eth adapter
  • Will require further configuration on the device (change eth0 → eth1)
  • The device will need a static IP assigned to at least one of the 2 networks (outbound/BAS)
• ADS Server has a username set to BACnet object name
• On ADS Server, “routing mode” is disabled
• If routing mode is enabled, there is likely a third party BACnet that will be utilized in place of Johnson BACnet
• All NAEs should have unique device IDs. Please audit prior to connecting your device.
  • If there are duplicate device IDs, it will cause issues for generic discovery but CopperTree can manually add them if we are aware ahead of time.