Cumulative 3-Input (1-Column + 1-Baseline-Column + Temp-line)

Description: Accepts 3 Inputs: 1 cumulative TL, 1 temperature TL, and 1 demand TL. The difference between subsequent data points is calculated for the cumulative meter, then summed over a requested interval. It is then displayed as a bar chart, alongside a 1-week offset, which acts as a baseline. The temperature meter is averaged over request period, and plotted as a line onto the bar graph. The minimum and maximum energy demand is shown as part of the table below.
Example: This chart is used to compare the current energy with previous energy usage, against a temperature line over a user selected time range. More specifically, if a week time range was selected, the current weeks energy usage would be compared against the previous weeks usage on a daily basis(default aggregation interval). This chart is useful to see if you are using more or less energy than before and how the temperature is affecting the energy usage.

  • Chart type: Column
  • Input type: Cumulative, Temperature, Demand
  • No. of Input meters: 1
  • Table Summary: None
  • Suitable for: Energy
  • Default Units: kWh 

Aggregation Type:

  • Consumption: Sum
  • Demand: Min/Max
  • Temperature: Average

Outputs: Delta, Sum of Period
Special Characteristics: Demand appears only in the table
Tags: Consumption, Comparison, Separate, Absolute, Meter, Temperature, Bar, Line, Baseline, 3-Input

3-Input, 1-Column, 1-Baseline-Column, Temp line