Convert energy savings to reduction in CO2 emissions (electrical)

Objective/Method/Outcome

  • Objective: Converts energy savings to reduction in CO2 emissions (electrical).
  • Method: Calculates the difference between current energy consumption and baseline energy consumption (normalized) and stores the result in a CTL. Uses Emissions Factor (EF) based on energy type and generation, to calculate the reduction in CO2 emissions from energy savings.
  • Outcome: Outputs a Calculated Trend Log named ‘Weekly CO2 Emissions Reduction [tCO2]’.

Applicable Systems

  • Any Energy meter.
  • Primary: AHU, RTU, MUA, ERV, BLR, CHLR
  • Secondary: HP, FCU, UV, UH

Logic

Once the inputs are interpolated for a daily sample, the logic flow starts by calculating the difference between consecutive energy samples (for both current energy consumption and baseline energy consumption). It then calculates the difference between the two to calculate a reduction in energy consumption. The calculated energy savings (kWh) is multiplied with Emissions Factor (tCO2/kWh) to calculate Daily Avoided CO2 Emissions which is then aggregated for the week to generate the output CTL.

for each day:
   * calculate energy savings as energy baseline - current energy consumption
   * convert this into tonnes of CO2
Calculate the weekly sum of CO2 emisisons
Convert energy savings to reduction in CO2 emissions (electrical)

Description / Method

Calculates a CTL of the difference between current energy consumption and normalized baseline energy consumption. Uses Emissions Factor (EF) based on energy type and generation, to calculate the reduction in CO2 emissions from energy savings.

Notes

EF will differ based on the energy source, and mode of energy generation, and geographical location. Source: https://www.epa.gov/energy/ghg-equivalencies-calculator-calculations-and-references

Rule Template Type

  • Insight Type: Energy
  • Trigger Type: N/A

Default Priority

Low

Inputs

Inputs Units Tags Description
Baseline Energy Consumption kWh meter,baseline Typical, historical Energy Consumption
Current Energy Consumption kWh meter Current energy consumption

Constants

Inputs Units Default Value Description
Emissions Factor metric tons of CO2/kWh 0.000703 Emissions per energy consumed note this is tons not kg

Output Calculated Trend Logs

Output CTL Units Frequency Description
Weekly CO2 Emissions Reduction tonnes CO2 weekly Weekly CO2 emissions reduction