Kaizen Release Note: V3.1.1

Release date: 2017-02-21

Enhancements

Ordering

• Order confirmation e-mail has been updated to provide a reminder on payment recurrence.

Systems

• A new option to display the subordinates of a system has been added to System dashboards. Clicking on the Vault icon will open up a Trend Log Viewer containing only the subordinates of the System.

Vault

• When Importing Trend Logs, seconds are now optional in the timestamp of the imported data set. The imported data will then have a timestamp containing :00 for the seconds.
• Imported Trend Log data can now be formatted in the following variants:
  • MM/DD/YYYY hh:mm
  • YYYY-MM-DD hh:mm
  • YYYY-MM-DD hh:mm:ss (ISO)

Community Library

• 15 new Rule Templates (including FDD and Energy analytics) have been added to the CopperTree Community Library.

• Determine if consumption meter has failed
• Determine if temperature sensor is faulty
• Determine if CCV is open while OAT is lower than threshold, and HCV or Steam Control Valve is open
• Determine if Damper (MAD, OAD, RAD, VAV Damper) Signal is Modulating at an Abnormal Rate
• Determine if free cooling could be used for AHU operation
• Determine if mixed air damper (MAD) control could be optimized during heating season
• Determine if mode has not changed at least once during the course of a week
• Determine if Cooling Tower Fan is Running when Bypass Valve is Open
• Monitor bypass valve position and flow measured at the cooling tower, and determine if flow is minimum when bypass valve is open
• Determine if two units that should be staged are turned ON at the same time, without sufficient delay
• Determine if unit is running for extended period of time
• Determine if there is no noticeable decrease in electrical load during unoccupied hours
• Determine if unit heaters are operating when not required
• Convert energy savings to reduction in CO2 emissions (electrical)
• Calculate kW/ton and Coefficient of Performance for Water Cooled Chillers (Imperial)

Bug Fixes

Administration

• The Energy Star property ID in a Building profile can now be edited using FireFox.
• Non-admin group users can again add pages to their Favorites.

Energy

• Energy Views can again be viewed using a custom date range.

Fault Detection

• Hovering over a Trend Log link will no longer show Undefined if the monitored object is not defined.

Reporting

• Setpoints in Manual and Equipment in Hand reports will now display the complete object reference including device number for objects with issues.
• Changing the date range of any saved report will now succeed.