Support Support
Search
Generic filters
  • Status
  • Documentation
  • Log Out

Kaizen

  • Knowledge Base
  • Kaizen
  • Systems

Systems

  • Systems
  • Configuring Rules Using Systems
  • Import Rule Templates Using Systems
  • System Auto-Discover
  • System Hierarchy
  • System Manual Setup
  • Quick Tag Multiple Systems
  • Vault
    • Vault
    • Create a Calculated Trend Log without receiving an Insight
    • Create Meters from Non-Cumulative Trend Logs
    • Manage Trend Logs
    • Load Controller Database
  • Charts and Reports
    • List of Charts
      • Legacy Charts
        • Column Charts
          • Multipurpose Non-Cumulative Chart
          • Multipurpose Cumulative Chart
          • Non-Cumulative 3-Input (1-Column + 2-Line)
          • Cumulative 5-Input Chart (2-Column + Stacked 3-Column)
          • Cumulative 5-Input (Stacked 3-Input + Stacked 2-Input)
          • Cumulative 5-Input Comparison
          • Cumulative 4-Input Comparison
          • Cumulative 3-Input Chart
          • Cumulative 2-Input Chart
          • Non-Cumulative 1-Input Bar Chart
          • Cumulative 1-Input (2-Bar)
          • Cumulative 3-Input (1-Col. + 1-Baseline-Col. + 1-Target-Col. + Temp-line)
          • Cumulative 3-Input (1-Column + 1-Baseline-Column + Temp-line)
          • Cumulative 1-Input
        • Stacked Column Charts
          • Multipurpose Non-Cumulative Chart
          • Multipurpose Cumulative Chart
          • Cumulative 5-Input (Stacked)
          • Cumulative 4-Input (Stacked)
          • Cumulative 3-Input (Stacked)
          • Cumulative 2-Input (Stacked)
          • Cumulative 5-Input Chart (2-Column + Stacked 3-Column)
          • Cumulative 5-Input (Stacked 3-Input + Stacked 2-Input)
        • Line Charts
          • Multipurpose Non-Cumulative Chart
          • Multipurpose Cumulative Chart
          • Non-Cumulative 12-Input Line Chart
          • Non-Cumulative 11-Input Line Chart
          • Non-Cumulative 10-Input Line Chart
          • Non-Cumulative 9-Input Line Chart
          • Non-Cumulative 8-Input Line Chart
          • Non-Cumulative 7-Input Line Chart
          • Non-Cumulative 6-Input Line Chart
          • Non-Cumulative 5-Input Line Chart
          • Non-Cumulative 4-Input Line Chart
          • Non-Cumulative 3-Input Line Chart
          • Non-Cumulative 4-Input Line Chart
          • Non-Cumulative 3-Input Line Chart
          • Non-Cumulative 3-Input (1-Column + 2-Line)
          • Non-Cumulative 2-Input Line Chart
          • Non-Cumulative 1-Input Line Chart
          • Heating and Cooling Degree Days (deg F)
          • Heating and Cooling Degree Days (deg C)
        • Area Charts
          • Cumulative 3-Input (Accumulating Line Series)
          • Cumulative 5-Input (Accumulating Line Series)
          • Cumulative 4-Input (Accumulating Line Series)
          • Cumulative 2-Input (Accumulating Line Series)
        • Pie Charts
          • Cumulative 2-Input (Pie Chart)
          • Cumulative 3-Input (Pie Chart)
          • Cumulative 4-Input (Pie Chart)
          • Cumulative 5-Input (Pie Chart)
      • Current Charts
        • Summary Tables
          • Building Operator Report - Schedules Changed
          • Building Operator Report - Detailed Insight Report
          • Building Operator Report - Setpoints in Manual
          • KPI Threshold Executive
          • KPI Maintenance
          • Performance KPI Executive
          • Insights Executive
          • Insights Digest
          • Building Operator Report - Equipment In Hand
        • Custom Charts
          • Temperature Bin Comparison
          • Average 11-Input Comparison
    • Charts
    • Create a Chart
    • Manage Reports
  • Connector
    • Adding new Connector
    • Mapping buildings to Connector
    • Connector Registry
  • Insights
    • Insights
    • Adding Enhanced Prioritization to a Rule Template
    • Advanced Filtering in Insight Management
    • Golden Standard Configuration
    • Configure Infrastructure Insights
    • Copy and Paste Golden Standard Configuration
    • Create Custom Views with Insight Management
    • Export Insight Reports with Insight Management
    • Configure Quick Filters
    • Import Rule Templates from the Building's Insight Page
    • List of Infrastructure Insights
    • Manage Insights
    • Subscribe to Views in Insight Management
    • Tagging Insights
    • How to use the Input Data Block
    • Manage Working Rules
    • Create Working Rules
  • Navigation and Administration
    • Navigation and Administration
    • Advanced Search
    • Manage Permissions
    • Add Admin Users
    • Create a new Kaizen User and set Password
    • Manage Building Settings
    • Move a Building
    • Manage Favorites
    • Status Page for Kaizen Server
  • Release Notes - Kaizen
    • V0
      • Curator Release Notes: V0.3.3
      • Curator Release Notes: V0.5.3 (Beta 1)
      • Curator Release Notes: V0.6.1 (Beta 1)
      • Curator Release Notes: V0.6.2 (Beta 1)
      • Curator Release Notes V0.6.3 (Beta 1)
      • Curator Release Notes: V0.6.4 (Beta 1)
      • Curator Release Notes: V0.7.1
    • V1
      • Kaizen Release Notes: V1.1.2
      • Kaizen Release Note: V1.2.0
      • Kaizen Release Notes: V1.3.0
      • Kaizen Release Notes: V1.3.2
      • Kaizen Release Notes: V1.5.1
      • Kaizen Release Notes: V1.5.2
      • Kaizen Release Notes: V1.5.3
      • Kaizen Release Notes: V1.5.4
      • Kaizen Release Notes: V1.5.5
      • Kaizen Release Notes: V1.5.7
      • Kaizen Release Notes: V1.6.0
      • Kaizen Release Notes: V1.6.1
      • Kaizen Release Notes: V1.6.2
      • Kaizen Release Notes: V1.6.3
      • Kaizen Release Notes: V1.6.4
      • Kaizen Release Notes: V1.6.5
      • Kaizen Release Notes: V1.6.7
      • Kaizen Release Notes: V1.6.8
    • V2
      • Kaizen Release Notes: V2.0.2
      • Kaizen Release Notes: V2.0.3
      • Kaizen Release Notes: V2.0.4
      • Kaizen Release Notes: V2.0.5
      • Kaizen Release Notes: V2.0.6
      • Kaizen Release Notes: V2.0.7
      • Kaizen Release Notes: V2.0.8
      • Kaizen Release Notes: V2.1.0
      • Kaizen Release Notes: V2.1.1
      • Kaizen Release Notes: V2.1.2
      • Kaizen Release Notes: V2.1.3
      • Kaizen Release Notes: V2.1.4
      • Kaizen Release Notes: V2.1.5
      • Kaizen Release Notes: V2.1.7
      • Kaizen Release Notes: V2.1.8
      • Kaizen Release Note: V2.1.9
      • Kaizen Release Note: V2.2.0
      • Kaizen Release Note: V2.2.1
      • Kaizen Release Note: V2.2.2
      • Kaizen Release Note: V2.2.3
      • Kaizen Release Note: V2.2.4
      • Kaizen Release Note: V2.2.5
      • Kaizen Release Note: V2.2.6
      • Kaizen Release Note: V2.2.7
      • Kaizen Release Note: V2.2.8
      • Kaizen Release Note: V2.2.9
      • Kaizen Release Note: V2.2.10
      • Kaizen Release Note: V2.2.11
      • Kaizen Release Note: V2.2.12
      • Kaizen Release Note: V2.3.00
      • Kaizen Release Note: V2.3.01
      • Kaizen Release Note: V2.3.02
      • Kaizen Release Note: V2.3.03
      • Kaizen Release Note: V2.3.04
      • Kaizen Release Note: V2.4.00
      • Kaizen Release Note: V2.4.01
      • Kaizen Release Note: V2.4.02
      • Kaizen Release Note: V2.4.03
      • Kaizen Release Note: V2.4.04
      • Kaizen Release Note: V2.4.05
      • Kaizen Release Note: V2.4.06
      • Kaizen Release Note: V2.4.07
      • Kaizen Release Note: V2.2.9
      • Kaizen Release Note: V2.2.10
      • Kaizen Release Note: V2.2.11
      • Kaizen Release Note: V2.2.12
      • Kaizen Release Note: V2.3.00
      • Kaizen Release Note: V2.3.01
      • Kaizen Release Note: V2.3.03
      • Kaizen Release Note: V2.3.04
      • Kaizen Release Note: V2.4.00
      • Kaizen Release Note: V2.4.01
      • Kaizen Release Note: V2.4.02
      • Kaizen Release Note: V2.4.04
      • Kaizen Release Note: V2.4.05
      • Kaizen Release Note: V2.4.06
      • Kaizen Release Note: V2.4.07
    • V3
      • Kaizen Release Note: V3.0.00
      • Kaizen Release Note: V3.0.01
      • Kaizen Release Note: V3.0.02
      • Kaizen Release Note: V3.0.03
      • Kaizen Release Note: V3.0.04
      • Kaizen Release Note: V3.0.05
      • Kaizen Release Note: V3.0.06
      • Kaizen Release Note: V3.0.07
      • Kaizen Release Note: V3.0.08
      • Kaizen Release Note: V3.0.09
      • Kaizen Release Note: V3.0.10
      • Kaizen Release Note: V3.1.0
      • Kaizen Release Note: V3.1.1
      • Kaizen Release Note: V3.1.2
      • Kaizen Release Note: V3.1.3
      • Kaizen Release Note: V3.1.4
      • Kaizen Release Note: V3.1.5
      • Kaizen Release Note: V3.1.6
      • Kaizen Release Note: V3.1.7
      • Kaizen Release Note: V3.1.8
      • Kaizen Release Note: V3.1.9
      • Kaizen Release Note: V3.1.10
      • Kaizen Release Note: V3.1.11
      • Kaizen Release Note: V3.1.12
      • Kaizen Release Note: V3.1.13
      • Kaizen Release Note: V3.1.14
      • Kaizen Release Note: V3.1.15
      • Kaizen Release Note: V3.2.00
      • Kaizen Release Note: V3.2.1
      • Kaizen Release Note: V3.2.2
      • Kaizen Release Note: V3.2.3
      • Kaizen Release Note: V3.2.4
      • Kaizen Release Note: V3.3.0
      • Kaizen Release Note: V3.3.0
      • Kaizen Release Note: V3.3.3
      • Kaizen Release Note: V3.3.4
      • Kaizen Release Note: V3.3.5
      • Kaizen Release Note: V3.3.6
      • Kaizen Release Note: V3.3.7
      • Kaizen Release Note: V3.3.8
      • Kaizen Release Note: V3.3.9
      • Kaizen Release Notes: V3.3.10
      • Kaizen Release Notes: V3.4.00
      • Kaizen Release Notes: V3.4.01
      • Kaizen Release Notes: V3.4.02
      • Kaizen Release Notes: V3.4.03
      • Kaizen Release Notes: V3.4.05
      • Kaizen Release Notes: V3.4.06
      • Kaizen Release Notes: V3.4.07
      • Kaizen Release Notes: V3.4.08
      • Kaizen Release Notes: V3.4.09
      • Kaizen Release Notes: V3.4.10
      • Kaizen Release Notes: V3.4.11
      • Kaizen Release Notes: V3.4.12
      • Kaizen Release Notes: V3.4.13
      • Kaizen Release Notes: V3.4.14
      • Kaizen Release Notes: V3.4.15
      • Kaizen Release Notes: V3.4.16
      • Kaizen Release Notes: V3.5.01
      • Kaizen Release Notes: V3.5.02
      • Kaizen Release Notes: V3.5.03
      • Kaizen Release Notes: V3.5.04
      • Kaizen Release Notes: V3.6.00
      • Kaizen Release Notes: V3.6.01
      • Kaizen Release Notes: V3.6.2
      • Kaizen Release Notes: V3.6.3
      • Kaizen Release Notes: V3.6.5
      • Kaizen Release Notes: V3.6.6
      • Kaizen Release Notes: V3.6.7
      • Kaizen Release Notes: V3.6.8
      • Kaizen Release Notes: V3.6.9
      • Kaizen Release Notes: V3.7.1
      • Kaizen Release Notes: V3.7.2
      • Kaizen Release Notes: V3.8.1 - Hotfix
      • Kaizen Release Notes: V3.7.9
      • Kaizen Release Notes: V3.7.5
      • Kaizen Release Notes: V3.7.6
      • Kaizen Release Notes: V3.7.7
      • Kaizen Release Notes: V3.7.8
      • Kaizen Release Notes: V3.8.1
      • Kaizen Release Notes: V3.8.2
      • Kaizen Release Notes: V3.8.3
      • Kaizen Release Notes: V3.8.4
      • Kaizen Release Notes: V3.8.5
      • Kaizen Release Note: V3.8.6
      • Kaizen Release Notes: 3.8.7
      • Kaizen Release Notes: 3.8.8
      • Kaizen Release Notes: 3.8.9
      • Kaizen Release Note: V3.8.10
      • Kaizen Release Note: V3.8.11
      • Kaizen Release Note: V3.8.13
      • Kaizen Release Note: V3.8.12
      • Kaizen Release Note: V3.8.14
      • Kaizen Release Note: V3.8.15
      • Kaizen Release Note: V3.8.16
      • Kaizen Release Note: V3.8.17
      • Kaizen Release Note: V3.8.17 - Hotfix
      • Kaizen Release Note: V3.8.18
      • Kaizen Release Note: V3.8.18 - Hotfix
      • Kaizen Release Note: V3.8.19
      • Kaizen Release Note: 3.8.20
      • Kaizen Release Note: 3.8.21
      • Kaizen Release Note: V3.8.21 - Hotfix
      • Kaizen Release Note: V3.8.22
      • Kaizen Release Notes: V3.8.23 Hotfix
      • Kaizen Release Note: V3.8.24
  • Settings
    • Settings
    • Add a Sub-Client in Your Client Account
    • Create and Configure Groups
    • Create and Configure Users
    • Create a Building and Map a CopperCube to the Building
    • Manage Building Settings
    • Set Up Your Kaizen Account
  • Systems
    • Systems
    • Configuring Rules Using Systems
    • Import Rule Templates Using Systems
    • System Auto-Discover
    • System Hierarchy
    • System Manual Setup
    • Quick Tag Multiple Systems
  • FDD Portfolio
    • FDD Portfolio
    • Tagging CTLs for the FDD Portfolio
    • Widget Descriptions
  • Rules and Logic
    • List of Rule Templates
      • CopperTree Standard Rules
        • Energy Rules
          • Power Calculations - Cooling Tower Fan
          • Power Calculations - Exhaust Fan
          • Primary air system is heating while discharge air temperature is above setpoint
          • VFD consistently runs at 100% speed
          • Primary air system is cooling while discharge air temperature is below setpoint
          • Power Calculations - Return Fan
          • Power Calculations - Pump
          • Power Calculations – Supply Fan
          • NIST APAR10 - Outdoor and mixed air temp should be nearly the same (Mode 3 - Mech. Cooling w/100% OA)
          • Hot Water Supply Temperature setpoint reset control is poor
          • Hot water system/Boiler energy consumption calculation
          • Hot Water System Differential Pressure setpoint reset control is poor
          • Hot/Chilled Water System - Differential pressure is too high with associated pumps off
          • Hot/Chilled Water System - Pump speed and status are mismatched
          • Chilled Water System – Chilled Water Supply Temperature setpoint reset control
          • Chilled Water System Differential Pressure setpoint reset control is poor
          • CHWST is Higher in the Secondary Loop than that in the Primary Loop
          • Chilled water system/Chiller energy consumption calculation
          • Chiller Efficiency is low
          • Cooling Tower staging and fan speed control is poor
          • AHU supply air temperature setpoint reset control is poor
          • AHU static pressure setpoint reset control is poor
          • AHU lacks Demand Control Ventilation
          • Energy recovery is not fully utilized in cooling season
          • Energy recovery is not fully utilized in heating season
          • Total Heat Transfer Effectiveness is low
          • Sensible Heat Transfer Effectiveness is low
        • Fault Detection
          • Airflow sensor may be faulty
          • Boiler command and status signals are mismatched
          • Zone Air Temperature sensor may be faulty
          • Health Compliance Package - Zone Temperature is outside the acceptable range
          • Supply air temperature should be greater than mixed air temperature while heating
          • Health Compliance Package - Building Pressure [kPa] Analysis
          • Zone Air Humidity sensor may be faulty
          • Fume hood in Emergency Purge Mode for longer than expected
          • Fume hood airflow is exceeding setpoint
          • Fume hood sash open during unoccupied hours
          • Health Compliance Package - Domestic Hot Water Flow Temperature Outside Range
          • Health Compliance Package - Hot water valve consistently 100% open
          • Health Compliance Package - Zone hot water valve consistently 100% open
          • Health Compliance Package - Chilled water valve consistently 100% open
          • Return air temperature sensor may be faulty
          • Discharge air temperature sensor may be faulty
          • Mixed Air Temperature sensor may be faulty
          • Hot Water Return Temperature sensor may be faulty
          • Chilled Water Return temperature sensor may be faulty
          • Chiller capacity is inadequate
          • Lead-lag pumps are running simultaneously
          • Create a Schedule CTL
          • VAV damper is consistently at 100%
          • Fume hood airflow is not reaching setpoint
          • Chiller is overcooling
          • Cooling tower fan command and status signals are mismatched
          • Zone air carbon dioxide (CO2) sensor may be faulty
          • Zone consistently in occupied mode
          • Cooling is active when zone temperature is below setpoint
          • Enhanced Prioritization - Boiler Cycling Excessively
          • Temperature drop across inactive cooling coil
          • Supply air temperature is modulating excessively
          • Heating valve remains open while unit is inactive
          • Outdoor air damper is fully open while cooling, with OAT above threshold
          • Mechanical cooling while outdoor air temperature is in ideal free cooling range
          • Enhanced Prioritization - Primary Air System Runtime Analysis
          • Health Compliance Package - Filter Replacement
          • Health Compliance Package - Outdoor Air Damper is not opening enough
          • Health Compliance Package - Purge Mode not utilized
          • Enhanced Prioritization - Cooling Tower Cycling Excessively
          • Enhanced Prioritization - Unit Heater Cycling Excessively
          • Heating is active when zone temperature is above setpoint
          • Health Compliance Package - Equipment Runtime Monitoring
          • Hot water supply temperature sensor may be faulty
          • Chilled water supply temperature sensor may be faulty
          • Exhaust fan command and status signals are mismatched
          • Pump command and status signals are mismatched
          • Return fan command and status signals are mismatched
          • Supply fan command and status signals are mismatched
          • Chilled command and status signals are mismatched
          • Outdoor air damper is consistently at 100%
          • Return air damper is consistently at 100%
          • Mixed air damper is consistently at 100%
          • Heating and Cooling Simultaneously
          • Enhanced Prioritization - Boiler operating above lockout temperature
          • Enhanced Prioritization - Chiller operating below lockout temperature
          • Enhanced Prioritization - Pump Cycling Excessively
          • Enhanced Prioritization - Return Fan Cycling Excessively
          • Enhanced Prioritization – Supply Fan Cycling Excessively
          • Health Compliance Package - CO2 Concentration Analysis
          • Cooling is insufficient
          • Heating is insufficient
          • Health Compliance Package - Overall Cooling Saturation
          • Health Compliance Package - Overall Heating Saturation
          • Health Compliance Package - Zone air humidity is outside acceptable range
          • Health Compliance Package - Hours of Occupancy
          • Outdoor and mixed air temperature should be similar when OAD is 100% open
          • Supply air temperature should be lower than mixed air temperature while cooling
          • Cooling valve remains open while unit is inactive
          • Hot Water System - Pump is operating with boilers OFF
          • Hot Water System - Boiler Status is ON with pumps OFF
          • Hot Water System - Staging Sequence Between Boilers and Primary Pumps is incorrect
          • Hot Water System - Boiler status and isolation valve position are mismatched
          • Hot/Chilled Water System - Water flow is too high with the associated pumps off
          • Hot Water System - Hot water return temperature is too high for condensing to occur
          • Hot Water System - Hot water return temperature is too low. Condensing is likely to occur
          • Chilled Water System - Bypass Valve is Open while Pump Speed is High
          • Chilled Water System - Pump is operating with chillers OFF
          • Chilled Water System - Chiller Status is ON with pumps OFF
          • Chilled Water System - Cooling Setpoint out of Range
          • Chilled Water System - Staging Sequence Between Chillers and Primary Pumps
          • Chilled Water System - Chiller status and isolation valve position are mismatched
          • Chilled Water System - Deviation between the active chiller CHWST and the common CHWST is too high
          • Chilled Water System - Deviation between the active chiller CHWRT and the common CHWRT is too high
          • Chilled Water System - Deviation between the active chiller CWST and the common CWST is too high
          • Chilled Water System - Deviation between the active chiller CWRT and the common CWRT is too high
          • Chilled Water System - Condenser water supply temperature setpoint reset control is poor
          • VAV is heating while damper is closed
          • VAV is heating while damper is closed
          • Temperature rise across inactive VAV reheat coil
          • Effective setpoint (Heating and Cooling) is unchanged between occupied and unoccupied schedule
          • Unoccupied heating setpoint is too high
          • VAV discharge air flow setpoint is a constant value in occupied schedule
          • Return Fan status and Supply Fan status are mismatched
          • Exhaust Fan status and Supply Fan status are mismatched
          • Return airflow is out of threshold
          • Exhaust airflow is out of threshold
          • Temperature rise across inactive pre-heating coil
          • Outdoor air damper is not fully open in Integrate cooling mode
          • Mix air damper is open during Integrated cooling mode
          • Mixed Air Temperature is not between Outdoor Air Temperature and Return Air Temperature
          • OAT and MAT is not approximately equal when MAD is fully closed
          • Supply air temperature is not less than mixed air temperature when mechanical cooling
          • Economizer outdoor air damper is open in mechanical cooling or heating mode
          • OAD is open when AHU is disabled
          • EAD is open when AHU is disabled
          • Return air humidity is out of comfort range
          • Energy Recovery Wheel status and Supply Fan status are mismatched
          • Energy Recovery Wheel Bypass Damper is operating incorrectly
          • Effective cooling setpoint is unchanged between occupied and unoccupied schedule
          • Unoccupied cooling setpoint is too low
          • VAV minimum discharge air flow setpoint equals to maximum discharge air flow setpoint
          • VAV supply air temperature is not greater than AHU supply air temperature when reheat coil is active
          • FCU Supply air temperature is not greater than space air temperature while heating
          • FCU Supply air temperature is not less than room air temperature while cooling
          • Parallel fan is not running while reheat coil is activated
          • Discharge air temperature is too high in heating mode
          • VAV Airflow Performance
          • OAD is short cycling
          • Effective heating setpoint is unchanged between occupied and unoccupied schedule
        • Integrity KPI
          • VAV supply airflow control requires tuning
          • Delta-T Analysis of Chilled Water System
          • Delta-T Analysis of Hot Water System
          • Hydronic Differential Pressure requires tuning
          • VFD Speed Analysis (Pump)
          • Hot water supply temperature control is poor
          • Condenser water supply temperature control is poor
          • Chilled water supply temperature control is poor
          • Health Compliance Package - Critical Zone Pressure Analysis
          • Hot deck temperature control is poor
          • Supply air pressure control requires tuning
          • VFD Speed Analysis (Exhaust Fan)
          • VFD Speed Analysis (Supply Fan)
          • VFD Speed Analysis (Return Fan)
          • Supply Air Temperature control is poor
          • Mixed air temperature control is poor
          • Cold deck temperature control is poor
          • VAV is supplying airflow while damper is closed
          • VAV Damper Performance
          • Building static pressure control requires tuning
      • Legacy Rules
        • 1-Meter Energy approaching Target
        • 1-Meter Energy-Baseline-Target
        • 1-Meter Energy over Target
        • 1-Meter Filter, Aggregation and Conversion (USGal to Litres)
        • 1-Meter Filter, Aggregation, and Conversion (kWh to GJ)
        • 1-Meter Filter and Aggregation
        • 1-Virtual Meter Filter and Aggregation
        • 1-Virtual Meter Filter and Aggregation Hourly
        • 5-Meter Energy-Baseline-Target
        • 5-Meter Filter, Aggregation and Conversion (USGal to Litres)
        • 5-Meter Filter, Aggregation and Conversion (kWh to GJ)
        • 5-Meter Filter and Aggregation
        • Determine if AHU MAT is not following RAT when drawing no outside air (Air Damper Leakage)
        • AHU Mode of Operation (for use with NIST APAR rule set)
        • Calculate electrical energy consumption and demand using VFD speed and motor size (affinity law)
        • Calculate kW/ton and Coefficient of Performance for Water Cooled Chillers (uses deg F temperature TLs)
        • Convert energy savings to reduction in CO2 emissions (electrical)
        • Convert Samples to Accumulating Meter
        • Determine boiler temperature performance KPI score
        • Determine chiller temperature performance KPI score
        • Determine if boiler is operating when OAT is above boiler enable set point
        • Determine if boiler system is slow to meet setpoint on startup
        • Determine if CCV is open while OAT is lower than the threshold, and HCV or Steam Control Valve is open
        • Determine if chiller is operating when OAT is below chiller enable set point
        • Determine if chiller system is slow to meet setpoint on startup
        • Determine if chiller temperature control requires tuning
        • Determine if consumption meter has failed
        • Determine if cooling control is ineffective/unresponsive
        • Determine if cooling tower bypass valve operation is faulty
        • Determine if Cooling Tower Fan is Running when Bypass Valve is Open
        • Determine if Damper (MAD, OAD, RAD, VAV Damper) Signal is Modulating at an Abnormal Rate
        • Determine if equip. amperage is higher than historical average
        • Determine if free cooling could be used for AHU operation
        • Determine if heating control is ineffective/unresponsive
        • Determine if heating and cooling control is overlapping
        • Determine if heating is undersized
        • Determine if mixed air damper (MAD) control could be optimized during heating season
        • Determine if mixed air damper control is suspect
        • Determine if mode has not changed at least once during the course of a week
        • Determine if outdoor air fraction is suspect
        • Determine if primary system is slow to meet setpoint on startup
        • Determine if secondary equip. is changing state too frequently
        • Determine if sensor is at fault/out of calibration
        • Determine if setpoint is static
        • Determine if system occupancy is changing state too frequently
        • Determine if temperature sensor is faulty
        • Determine if there is no noticeable decrease in electrical load during unoccupied hours
        • Determine if two units that should be staged are turned ON at the same time, without sufficient delay
        • Determine if Unit Heaters are Operating when Temperature is Above Setpoint
        • Determine if unit is running for extended period of time
        • Determine if VAV damper is constantly at near maximum (100% open)
        • Determine if zone cooling is undersized
        • Determine if zone heating is undersized
        • Determine if zone system is slow to meet setpoint on startup
        • Determine severity of supply air temperature control loop error
        • Determine severity of zone temperature control loop error
        • Determine supply air flow performance KPI score
        • Determine supply air pressure performance KPI score
        • Determine supply air temperature performance KPI score
        • Determine zone temperature performance KPI score
        • Enhanced Prioritization - Determine if boiler is operating when OAT is above lockout temperature
        • Enhanced Prioritization - Determine if equipment is changing state more frequently than specified
        • Enhanced Prioritization - Equipment Runtime Analysis
        • Enhanced Prioritization - Indoor Air Quality Analysis: CO2 Concentration
        • Enhanced Prioritization - Indoor Temperature Analysis
        • Equipment is running out of schedule hours
        • Heating and Cooling Degree Days [deg C] [Advanced Formula]
        • Heating and Cooling Degree Days [deg C] [Expert Formula]
        • Heating and Cooling Degree Days [deg C or F or K] [Basic Formula]
        • Heating and Cooling Degree Days [deg C or F or K] [Intermediate Formula]
        • NIST APAR1 - Supply air temp should be greater than mixed air temp (Mode 1 - Heating)
        • NIST APAR11 - Supply air temp should be less than mixed air temp (Mode 3 - Mech. Cooling w/100% OA)
        • NIST APAR12 - Supply air temp should be less than return air temp (Mode 3 - Mech. Cooling w/100% OA)
        • NIST APAR13 - Cooling coil valve command is fully open and SAT error exists (Mode 3 - Mech. Cooling w/100% OA)
        • NIST APAR14 - Cooling coil valve command is frequently fully open (Mode 3 - Mech. Cooling w/100%OA)
        • NIST APAR15 - Outdoor air temp too low for Mechanical Cooling w/min OA (Mode 4)
        • NIST APAR16 - Supply air temp should be less than mixed air temp (Mode 4 - Mech. Cooling w/min OA)
        • NIST APAR17 - Supply air temp should be less than return air temp (Mode 4 - Mech. Cooling w/min OA)
        • NIST APAR18 - Outdoor air fraction out of acceptable range (Mode 4 - Mech. Cooling w/min OA)
        • NIST APAR19 - Cooling coil valve command is fully open and SAT error exists (Mode 4 - Mech. Cooling w/min OA)
        • NIST APAR2 - Outdoor air fraction out of acceptable range (Mode 1 - Heating)
        • NIST APAR20 - Cooling coil valve is frequently fully open (Mode 4 - Mech. Cooling w/min OA)
        • NIST APAR21 - Heating/cooling/mixed air damper control is overlapping (Mode 5 - Unknown Occupied Mode)
        • NIST APAR22 - Heating/cooling control is overlapping (Mode 5 - Unknown Occupied Mode)
        • NIST APAR23 - Heating/mixed air damper control is overlapping (Mode 5 - Unknown Occupied Mode)
        • NIST APAR24 - Cooling/mixed air damper control is overlapping (Mode 5 - Unknown Occupied Mode)
        • NIST APAR25 - Persistent supply air temperature error exists (All Occupied Modes)
        • NIST APAR26 - Sensor fault/miscalibration: mixed air temp too low (All Occupied Modes)
        • NIST APAR27 - Sensor fault/miscalibration: mixed air temp too high (All Occupied Modes)
        • NIST APAR28 - Mode of operation changing state too frequently (Mode Changes)
        • NIST APAR3 - Heating coil valve command is fully open and SAT error exists (Mode 1 - Heating)
        • NIST APAR4 - Heating coil valve command is frequently fully open (Mode 1 - Heating)
        • NIST APAR5 - Outdoor air temp too high for Cooling w/OA (Mode 2)
        • NIST APAR6 - Supply air temp should be less than return air temp (Mode 2 - Cooling w/OA)
        • NIST APAR7 - Supply and mixed air temp should be nearly the same (Mode 2 - Cooling w/OA)
        • NIST APAR8 - Outdoor air temp too low for Mech. Cooling w/100% OA (Mode 3)
        • NIST APAR9 - Outdoor air temp too high for Mechanical Cooling w/100% OA (Mode 3)
        • Temperature has been below threshold for the past 24h
        • VAV Pressure Control Performance KPI
    • List of Logic Blocks
      • Aggregate Logic Block
      • Binary Filter Expression Logic Block
      • Building Weather Station Logic Block
      • Calculated Trend Log Data Logic Block
      • Cloud Cover Data Logic Block
      • Cumulative Difference Logic Block
      • Date Part Logic Block
      • Delta Logic Block
      • Filter Expression Logic Block
      • Humidity Data Logic Block
      • Linear Regression Logic Block
      • Maximum Logic Block
      • Minimum Logic Block
      • Multiple Expression Logic Block
      • Multiple Union Logic Block
      • Normalizing Logic Block
      • Offset Logic Block
      • Precipitation Data Logic Block
      • Pressure Data Logic Block
      • Rolling Aggregate Logic Block
      • Sum Logic Block
      • Visibility Data Logic Block
      • Wind Speed Data Logic Block
      • Enhanced Prioritization - Determine if chiller is operating when OAT is below lockout temperature
      • Input Data Logic Block
    • Create a Calculated Trend Log without receiving an Insight
    • How to Adjust Deadbands
    • How to Manage Rules
    • Manage Logic Blocks
    • Use the Logic Builder Canvas
    • Rules and Logic
  • Energy
    • Energy
    • Baseline Comparison in Energy
    • Create Meters from Non-Cumulative Trend Logs
    • Manage Meters
CopperTree Analytics

© 2023 CopperTree Analytics. All rights reserved.

  • Privacy Policy
  • Terms and Conditions

Crafted with by Forge and Smith.

Learn More

  • About
  • FAQ’s
  • Blog
  • Contact
  • News

Support

  • Docs
  • Forum
  • APIs
  • Surrey

    5455 152nd Street – Suite 300
    Surrey, BC V3S 5A5

    Bellevue

    3120 139th Ave SE #500
    Bellevue, WA 98005

    Contact Us

    Hours:
    7:30am-4:30pm (PST/PDT)
    Monday to Friday

    +1 (778) 726-0524 [email protected]
  • © 2021 CopperTree Analytics.